At+Cgsms Select Service For Mo Sms Messages - Siemens TC63 Command Set

TC63 AT Command Set
11.13 AT+CGSMS
11.13

AT+CGSMS Select service for MO SMS messages

Syntax
Test Command
AT+CGSMS=?
Response(s)
+CGSMS: (list of supported <service>s)
OK
Read Command
AT+CGSMS?
Response(s)
+CGSMS: <service>
OK
Write Command
AT+CGSMS=[<service>]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
GSM 07.07
Command Description
The test command is used for requesting information on which services and service preferences can be set by
using the write command
AT+CGSMS
The read command returns the currently selected service or service preference.
The write command is used to specify the service or service preference that the MT will use to send MO SMS
messages. If parameter
<service>
Parameter Description
(num)
<service>
A numeric parameter which indicates the service or service preference to be used. Parameter is global for all
interfaces and volatile.
0
1
2
(&F)(P)
3
Note
• Sending SMS via GPRS is only possible when mobile is attached using AT+CGATT.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
%
is not given, the current value remains unchanged.
GPRS
Circuit switched
GPRS preferred (use circuit switched SMS transfer if GPRS SMS transfer is
not possible, for example when the mobile is not GPRS attached or the network
does not support SMS over GPRS)
Circuit switched preferred (use GPRS if circuit switched is not available)
Page 298 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
Last
% % ! % !
5/24/05