Siemens TC63 Command Set page 117

TC63 AT Command Set
5.3 AT^SPIC
at+cpin=4714
+CME ERROR: incorrect password
at^spic
^SPIC: 63
OK
EXAMPLE 3
This example shows that after successful SIM PIN1 authentication the counter of the
read command refers to SIM PIN2, i.e. it does not reflect the status of SIM PIN1. This may be a problem if
the user enters a wrong PIN1 and is not aware that the number of attempts left to enter SIM PIN1 is counted
down.
+CREG: 0
at+cpin=1234
OK
+CREG: 2
+CREG: 1
at+cpin?
+CPIN: READY
at^spic
^SPIC: 3
OK
AT^SPIC?
^SPIC: SIM PIN2
OK
at+clck="SC",0,456789
CME ERROR: incorrect password
at^spic
^SPIC: 3
at+clck="SC",0,456789
CME ERROR: incorrect password
at^spic
^SPIC: 3
at+clck="SC",0,456789
CME ERROR: incorrect password
+CREG: 0
at^spic
^SPIC: 10
To avoid conflicts we recommend to use the
mand only. The read command clearly states the currently required password, and the write command may
be used to get the counter for a specific <facility>, in this case for example "P2".
TC63_ATC_V00.490
Confidential / Draft - Do not copy
The mobile ist properly registered to the network.
The AT+CPIN? read command confirms that SIM
PIN1 authentication was successful.
As SIM PIN1 authentication was successful, the
counter relates to SIM PIN2 and correctly indicates
that the user has 3 attempts to enter SIM PIN2.
Likewise, the read command notifies that the ME is
waiting for SIM PIN2.
First attempt to enter a wrong SIM PIN1.
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
Second attempt to enter a wrong SIM PIN1.
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
Third attempt to enter a wrong SIM PIN1.
SIM PIN1 authentication is no longer valid.
This time, after the SIM PIN1 code has been dis-
abled, the counter indicates the status of SIM PIN1
and notifies that 10 attempts are left to enter the SIM
PUK.
read and write commands rather than the execute com-
AT^SPIC
Page 117 of 501
s
execute and
AT^SPIC
5/24/05