TC63 AT Command Set
20. Miscellaneous Commands
20.
Miscellaneous Commands
The AT Commands described in this chapter are related to various areas.
20.1
A/ Repeat previous command line
Syntax
Exec Command
A/
Response(s)
Reference(s)
V.250
Command Description
Repeat previous command line.
Notes
•
Line does not need to end with terminating character.
•
After beginning with the character "a" or "A" a second character "t", "T" or "/" has to follow. In case of using a
wrong second character, it is necessary to start again with character "a" or "A".
•
If autobauding is active, the command
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
!
%
%
cannot be used (see AT+IPR).
A/
Page 457 of 501
s
%
%
%
%
Last
!
%
!
5/24/05