At+Frm Receive Data - Siemens TC63 Command Set

TC63 AT Command Set
12.4 AT+FRM
12.4

AT+FRM Receive Data

The command causes the TA to enter the receive mode using the modulation defined in Section 12.1,
AT+FRM
FAX parameters. An ERROR response code results if this command is issued while the modem is on-hook.
Syntax
Test Command
AT+FRM=?
Response(s)
(list of <mod>s)
OK
Write Command
AT+FRM=<mod>
Response(s)
CONNECT
If error is related to ME functionality:
ERROR
Reference(s)
TIA/EIA-578
Notes
• Used for Fax Class 1 only
• <mod>= 3 is not possible
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
! % ! %
Page 314 of 501
s
% ! ! !
Last
! !
5/24/05