At+Cmgd Delete Sms Message - Siemens TC63 Command Set

TC63 AT Command Set
13.3 AT+CMGD
13.3

AT+CMGD Delete SMS message

Syntax
Test Command
AT+CMGD=?
Response(s)
OK
Write Command
AT+CMGD=<index>
Response(s)
OK
ERROR
+CMS ERROR
Reference(s)
GSM 07.05
Command Description
Write command deletes message from preferred message storage
Notes
• If there is no SMS stored at the selected index, the response is OK too.
• This command should be used only after the SMS data from the SIM have been read successfully for the first
time. This may take up to 30 seconds after ^SYSSTART depending on the SIM used. A SMS delete attempt
before the SIM is ready will result in ''+CME Error: 14'' (SIM busy).
• We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowl-
edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME
has completed reading data from the SIM card.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
<mem1>
Page 325 of 501
s
% % % !
location <index>.
Last
% !
5/24/05