Ate Enable Command Echo - Siemens MC55 Command Set

MC55 AT Command Set
4.5 ATE
4.5

ATE Enable command echo

Syntax
Exec Command
ATE [ ]
<value>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
V.25ter
Command Description
This setting determines whether or not the TA echoes characters received from TE during command state.
Parameter Description
(num)(&W)(&V)
<value>
[0]
(&F)
1
Note
• In case of using the command without parameter,
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% % %
Echo mode off
Echo mode on
Page 93 of 469
is set to 0.
<value>
s
m
obile
2/10/04