Siemens TC63 Command Set page 213

TC63 AT Command Set
9.5 AT+CCUG
(num)
<info>
state of the call
(D)
0
1
2
3
Notes
• The active settings for omitted parameters are retained without changes.
• Explicit CUG invocation means that at each call setup, CUG information is added to the called number.
• Upon delivery, settings are predefined with
<n>=0,
<index>=10,
<info>=0.
These delivery defaults cannot be recalled automatically.
• When starting a call with ATD, Parameter 'G' or 'g' of command
for this single call is identical to the option already selected with AT+CCUG.
• Current settings are saved in the ME automatically.
• or do not influence the current settings.
ATZ AT&F
• some combinations of parameters may lead to rejection of CUG calls by the network. For more information,
please consult GSM 04.85
TC63_ATC_V00.490
Confidential / Draft - Do not copy
no information
suppress outgoing access
suppress preferential CUG
Suppress preferential CUG and Outgoing Access.
Page 213 of 501
s
will have no effect if the option selected
ATD
5/24/05