At^ssda Set Sms Display Availability - Siemens TC63 Command Set

TC63 AT Command Set
13.27 AT^SSDA
13.27

AT^SSDA Set SMS Display Availability

This command allows to notify the TC63 of its controlling application's capability to immediately display incoming
SMS on a display.
If the application is able to display incoming SMS, class 0 SMS shall be displayed immediately. However, if it
does not, class 0 SMS shall be treated as if no message class is determined (GSM 03.38[19]).
The effect of this command if <da>=1 is to determine the behavior of parameter
If <da>=1 and <mt>=1 incoming class 0 SMS need to be acknowledged with
AT+CSMS)
If multiplex mode is enabled (AT+CMUX) and <da>=1 with <mt>=1 is set on any logical channel, all other chan-
nels have to use <mt>=0.
Syntax
Test Command
AT^SSDA=?
Response(s)
^SSDA:list of supported <da>s
OK
Read Command
AT^SSDA?
Response(s)
^SSDA:<da>
OK
Write Command
AT^SSDA=<da>
Response(s)
OK
Reference(s)
SIEMENS
Command Description
The read command returns ME's current capability setting.
Parameter Description
(num)
<da>
Display Availability
(&F)
0
1
Note
• If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for
routing and indicating SMS. For example, if messages shall be routed directly to one instance of the TE (set
with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with
on another instance. Any attempt to activate settings that conflict with existing settings on another interface,
will result in CME ERROR, or accordingly CMS ERROR.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
Application is not able to display incoming SMS
Application is able to display incoming SMS
Page 361 of 501
<mt>
AT+CNMA
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
of AT+CNMI:
(see also and
AT+CNMI
Last
% % ! % !
or
AT+CMER AT+CNMI
5/24/05