At&W Stores Current Configuration To User Defined Profile - Siemens TC63 Command Set

TC63 AT Command Set
2.3 AT&W
2.3 AT&W Stores current configuration to user defined profile
stores the currently set parameters to a user defined profile in the non-volatile memory.
AT&W
Syntax
Exec Command
AT&W[<value>]
Response(s)
OK
ERROR/+CME ERROR <err>
Reference(s)
V.250
Parameter Description
(num)
<value>
[0]
Notes
• The user defined profile will be restored automatically after power-up. Use
to restore factory settings. Until the first use of AT&W,
AT&F
• stores all global settings and the current local settings of the interface, on which the command is exe-
AT&W
cuted.
• A list of parameters stored to the user profile can be found in Section 21.5,
able with AT&W.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
Number of profile
Page 34 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
ATZ
works as AT&F.
ATZ
AT Command Settings stor-
s
Last
% % ! % !
to restore user profile and
5/24/05