Siemens TC63 Command Set page 405

TC63 AT Command Set
17.9 AT^SPBG
(num)
<RealLocReq>
Is a display of the "real"
[0]
1
(str)
<number>
String type phone number in format specified by <type>.
The number parameter may be an empty string.
(num)
<type>
Type of address octet, which defines the used type of number (ton) and the numbering plan identification (npi).
Please consider that for types other than 129 or 145 dialing from phonebook with
on the network, not always possible (refer to GSM 04.08 subclause 10.5.4.7 for details). See also
AT+CPBW.
Possible values are:
145
161
209
255
129
(str)(+CSCS)
<text>
Text assigned to the phone number. The maximum length for this parameter is given in test command response
<tlength>.
(num)
<used>
Value indicating the number of used locations in selected memory storage.
(num)
<location>
The location within phonebook memory at which the corresponding entry is located.
This location may be used for other commands (e.g.
(num)
<nlength>
Maximum length of phone number for "normal" locations. Depending on the storage, a limited number of loca-
tions with extended memory is available per phonebook. Please refer to AT command
(num)
<tlength>
Maximum length of
<text>
given in octets. If the
<text>
string is given in UCS2, the maximum number of characters depends on the coding scheme used for
<text>
the alpha field of the SIM according to GSM 11.11, Annex B [23]. In the worst case the number of UCS2 char-
acters is at least one less than half the number of GSM characters.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
of the entry required?
<location>
Do not show an entry's "real" location number. Parameter
be displayed.
Show the "real" location number as parameter
entry.
Dialing string
<number>
National number. Network support of this type is optional.
Dialing string
<number>
digit characters other than "*", "#" or "+". Note that phonebook entries saved
with this type cannot be dialed.
Dialing string
<number>
i.e. "*", "#" codes are contained. Network support of this type is optional.
Otherwise
assigned to the telephone number. The value indicated by the test command is
string is given in GSM characters, each character corresponds to one octet. If the
Page 405 of 501
includes international access code character '+'
has been saved as ASCII string and includes non-
is a command to control a Supplementary Service,
or ATD><mem><n>)
AT+CPBR
s
<location>
at the end of each
<location>
is, depending
ATD><mem><n>
<type>
for detail.
AT+CPBW
5/24/05
will not
of