Ats8 Set Number Of Seconds To Wait For Comma Dialing Modifier - Siemens TC63 Command Set

TC63 AT Command Set
7.15 ATS8
7.15

ATS8 Set number of seconds to wait for comma dialing modifier

This command specifies the amount of time, in seconds, that the DCE shall pause, during signalling of call
addressing information to the network (dialling), when a "," (comma) dial modifier is encountered in a dial string.
Syntax
Read Command
ATS8?
Response(s)
<n>
OK
Write Command
ATS8=<n>
Response(s)
OK
ERROR
Reference(s)
V.250
Command Description
No effect for GSM.
Parameter Description
(num)(&W)(&V)
<n>
(&F)
0
1...255
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
!
DCE does not pause when "," encountered in dial string
Number of seconds to pause
Page 157 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% ! % %
s
Last
! ! ! % !
5/24/05