At^sset Indicate Sim Data Ready - Siemens TC63 Command Set

TC63 AT Command Set
14.4 AT^SSET
14.4

AT^SSET Indicate SIM data ready

After power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The
command controls the presentation of the
channel, when the ME has finished reading SIM data. Afterwards all commands that depend on SIM data fields
can be used, e.g. SMS and phonebook commands.
Syntax
Test Command
AT^SSET=?
Response(s)
^SSET:(list of supported <n>s)
OK
Read Command
AT^SSET?
Response(s)
^SSET: <n>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SSET=[<n>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s)
SIEMENS
Unsolicited Result Code
^SSIM READY
The URC acknowledges to the user that SIM data is accessible.
Parameter Description
(num)(&W)(&V)
<n>
URC presentation mode
(&F)
0
1
TC63_ATC_V00.490
Confidential / Draft - Do not copy
"^SSIM READY" URC which indicates, on the corresponding serial
PIN
!
Disable URC "^SSIM READY" indication.
Enable URC "^SSIM READY" indication.
Page 370 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
AT^SSET
Last
% % ! % !
5/24/05