At^scms Send Concatenated Sms Messages - Siemens TC63 Command Set

TC63 AT Command Set
13.20 AT^SCMS
13.20

AT^SCMS Send concatenated SMS messages

Sending a concatenated message is similar to sending a "normal" message, except that each segment of the
concatenated message must be identified by the additional parameters <seq>,
segments of the message one by one, the
Syntax
Test Command
AT^SCMS=?
Response(s)
OK
Write Command
Command syntax for text mode (see AT+CMGF=1):
AT^SCMS=<da>[, <toda>], <seq>, <max>, <ieia>,
Response(s)
+CMGS: <mr>[, <scts>]
OK
If sending fails
ERROR
+CMS ERROR
Reference(s)
SIEMENS
Command Description
The write command transmits one segment of a concatenated short message from TE to network (SMS-SUB-
MIT).
After invoking the write command wait for the prompt ">" and then start to write the message. To send the mes-
sage simply enter
<CTRL-Z>
To abort sending use
<ESC>
The message reference
identify the message in a delivery status report provided as an unsolicited result code.
Notes
• See notes provided for AT+CMGS.
• Command is only available if AT+CMGF=1.
TC63_ATC_V00.490
Confidential / Draft - Do not copy
AT^SCMS
. After the prompt a timer will be started to observe the input.
. Abortion is acknowledged with "OK", though the message will not be sent.
is returned to the TE on successful message delivery. The value can be used to
<mr>
Page 353 of 501
write command must be executed for each segment.
Text can be entered
<ref>
<CR>
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% % % %
s
and <ref>. To send all
<ieia>
/
<CTRL-Z> <ESC>
% % % !
Last
! !
5/24/05