At+Frh Receive Data Using Hdlc Framing - Siemens TC63 Command Set

TC63 AT Command Set
12.3 AT+FRH
12.3

AT+FRH Receive Data Using HDLC Framing

The command enables the TA to receive frames using the HDLC protocol and the modulation defined
AT+FRH
in Section 12.1, FAX parameters. An ERROR response code results if this command is issued while the modem
is on-hook.
Syntax
Write Command
AT+FRH=<mod>
Response(s)
CONNECT
If error related to ME functionality
ERROR
Reference(s)
TIA/EIA-578
Note
• Used for Fax Class 1 only
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
! % ! %
Page 313 of 501
s
% ! ! !
Last
! !
5/24/05