Example: Configuring Socket Listener; Example: Configuring Socket Client For Calling A Socket Listener On Another Host - Siemens TC63 Command Set

TC63 AT Command Set
10.2 AT^SISS
<srvParmValue-pDelFlag>
Supported flag values in
contains the POP3 user command Retrieve ("3").
[0]
1
10.2.1

Example: Configuring Socket Listener

The example assumes that a connection profile has been created as explained in Section
10.1.2. Keep in mind that if the host is configured as listener another service profile must be left free to be dynam-
ically assigned as Server when the listener receives a connection request from a remote client.
Configure the service profile 4 for use as Socket listener:
at^siss=4,srvType,socket
OK
at^siss=4,conId,0
OK
at^siss=4,address,"socktcp://lis-
tener:65534"
OK
Open the Socket service and query the IP address dynamically assigned to the Socket listener:
at^siso=4
OK
at^siso?
^SISO: 0, ""
^SISO: 1, ""
^SISO: 2, ""
^SISO: 3, ""
^SISO: 4, "Socket","3","3","0","0","10.10.0.187:65534","0.0.0.0:0"
^SISO: 6, ""
^SISO: 7, ""
^SISO: 8, ""
^SISO: 9, ""
OK
10.2.2 Example: Configuring Socket Client for Calling a Socket Listener
on Another Host
The example assumes that a connection profile has been created as explained in Section
10.1.2.
Configure the client's service profile 1 for calling a Socket listener on another host:
at^siss=1,srvType,socket
OK
at^siss=1,conId,0
TC63_ATC_V00.490
Confidential / Draft - Do not copy
(num)
for
<srvParmValue> <srvParmTag>
Messages will not be deleted on the server.
Delete messages on the server which have been retrieved successfully.
Page 250 of 501
value "pDelFlag". Only applicable if the profile
Select service type Socket.
Select connection profile 0.
The host specifies its local port 65534 to be used for
the Socket listener service. The local IP address will
be dynamically assigned when the service is opened
with AT^SISO.
Open the Socket service.
Query the current status of services. All service pro-
files are unused, except for service profile 4 which is
running in listener mode, where <srvState>=3 (lis-
tening) and <socketState>=3 (LISTENER). The
response also indicates the IP address dynamically
assigned to the listener.
Select service type Socket.
Select connection profile 0.
s
10.1.1 or Section
10.1.1 or Section
5/24/05