At^snfpt Set Progress Tones - Siemens MC55 Command Set

MC55 AT Command Set
16.14 AT^SNFPT
16.14

AT^SNFPT Set progress tones

Syntax
Test Command
AT^SNFPT=?
Response(s)
^SNFPT: (list of supported
OK
Read Command
AT^SNFPT?
Response(s)
^SNFPT: <pt>
OK
Write Command
AT^SNFPT=<pt>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Command Description
The write command controls the Call Progress Tones generated at the beginning of a mobile originated call
setup.
Parameter Description
(num)
<pt>
0
(P)
1
Note
• Please note that the setting is stored volatile, i.e. after restart or reset, the default value 1 will be restored.
MC55_ATC_V01.05
Confidential / Released
s)
<pt>
MUX2 MUX3
% % %
Disables Call Progress Tones
Enables Call Progress Tones (audible tones shortly heard on the phone when
ME starts to set up a call.)
Page 412 of 469
s
m
obile
2/10/04