Commissioning; Introduction; Factory-Set Parameters - Siemens SIWAREX WT241 Manual

Commissioning

7.1

Introduction

Commissioning consists mainly of checking the mechanical scale structure, setting
parameters, calibration, and verification of the envisaged functionality. A lot of helpful
information concerning the correct mechanical design of a belt scale can be found in the
respective manuals.
These manuals are available online as downloads → Manuals for belt scales
(http://support.automation.siemens.com/WW/view/de/18235463/133300).
7.2

Factory-set parameters

The electronic weighing system described here is provided with factory-set parameters.
Parameters which can be entered in % or time are preset in such a way that they provide
good results for most applications.
SIWAREX WT241
Manual, 05/2015, A5E36046748A
7
43