Which Information Do Lasterror And Errorinfo Contain - Avaya Customer Interaction Express 1.0 IVR-Editor User Manual

Which information do LastError and ErrorInfo
contain?
Values of the system variables LastError and ErrorInfo
When a script is started the value of the system variable LastError and
ErrorInfo is set to 0. The value is not changed if no error occurs during the
processing of the element.
Moreover, each element, except for the Logic, Branch, and Define variable
elements, sets the LastError or ErrorInfo variable to 0 at the beginning and
describes it with an appropriate error value before exiting through the Error-exit
connector.
With the Logic, Branch and Define variable elements, the LastError and
ErrorInfo system variables can be saved or evaluated right away.
Database elements
If an error occurs during the processing of a database element, the value of the
system variable ErrorInfo is set with an ODBC error code for database
elements. These error values are described in the relevant ODBC manual for the
database used.
Elements Call, Consultation, Transfer, Toggle
The telephony elements Call, Consultation, Transfer and Toggle have several
different exit connectors. These exit connectors are used if the corresponding
conditions or causes happen. Not all possible telephony causes are taken into
account for exit connectors. Further telephony causes may occur in individual
cases. In these cases the element Call or Callback is exited via the Error-exit
connector. A corresponding message is saved in the ErrorInfo system variable.
20 • Terms and elements of the IVR Editor
User Manual CIE 1.0 IVR-Editor