Table of Contents
Advertisement
User Manual CIE 1.0 IVR-Editor
Configuring the columns
You can configure which information is shown in the table. The standard setting
is used by default.
Proceed as follows to configure the columns.
1. In the table view, click the Columns button. The Configuration of
Columns dialog opens.
6. Deselect Use defaults.
7. You can customize the visible columns with the buttons <<<
Insert >>> Remove, Up and Down.
8. Click OK to save your settings. The table of objects is then
displayed with the configured columns.
Searching in columns
You can search a table for certain entries. You will find the respective search
fields at the bottom area of the table. You can thus search a table containing
many objects for specific objects with certain properties.
For example, proceed as follows to search for a tag with a specific name:
1. Enter "b", for example, in the search field for the name.
9. The first entry found is selected in the table. In our case a tag
starting with "b".
Meet the IVR Editor module • 15
Advertisement
Table of Contents
