Configure Ipfdb Route-Add - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

configure ipfdb route-add

configure ipfdb route-add [clear-all | clear-subnet]
Description
Specifies which routes are deleted and reinstalled with a new gateway.
Syntax Description
clear-all
clear-subnet
Default
The default is
clear-all
Usage Guidelines
To see the current setting, use the
Example
The following command clears only the IPFDB entries associated with the new route's subnet:
configure ipfdb route-add clear-subnet
History
This command was first available in ExtremeWare 7.0.
Platform Availability
This command is available on all platforms.
1162
Clears all IPFDB entries associated with a route if a more specific route
is installed.
Clears only the IPFDB entries associated with the new route's subnet
.
show ipconfig
command.
ExtremeWare Software 7.3.0 Command Reference Guide
.