Configuring Device Settings - Extreme Networks Altitude 4700 Series Product Reference Manual

Configuring Device Settings

Configure a set of minimum required device settings within the Quick Setup screen. The values (LAN,
WAN etc.) can often be defined in other locations within the menu tree. When you change the settings
in the Quick Setup screen, the values also change within the screen where these parameters also exist.
Additionally, if the values are updated in these other screens, the values initially set within the Quick
Setup screen will be updated.
NOTE
A scheme for radio configuration and WIPS server management has been added within the Quick Setup
GUI applet. Up to eight radio buttons are now available (depending on the number radios supported by the Access
Point). These radio buttons define how WLAN and sensor functionality are supported amongst the radios available
to the Access Point.
To define a basic Access Point configuration:
1 Select System Configuration > Quick Setup from the menu tree, if the Quick Setup screen is not already
displayed.
2 Select the System Configuration tab to define the Access Point's system, WIPS server and radio
configuration.
NOTE
The WIPS Server designation and radio configuration is defined as part of the Access Point's quick
setup. For a description of sensor functionality and how it relates to Access Point operation, see
Support" on page 23.
Altitude 4700 Series Access Point Product Reference Guide
"Sensor
67