Extreme Networks Altitude 4700 Series Product Reference Manual page 264

Monitoring Statistics
To view access point WAN Statistics:
1 Select Status and Statistics > WAN Stats from the access point menu tree.
2 Refer to the Information field to reference the following access point WAN data:
Status
HW Address
IP Addresses
Mask
Link
Speed
3 Refer to the Received field to reference data received over the access point WAN port.
264
The Status field displays Enabled if the WAN interface is
enabled on the WAN screen. If the WAN interface is
disabled on the WAN screen, the WAN Stats screen
displays no connection information and statistics.
The Media Access Control (MAC) address of the access
point WAN port. The WAN port MAC address is hard
coded at the factory and cannot be changed.
The displayed Internet Protocol (IP) addresses for the
access point WAN port.
The Mask field displays the subnet mask number for the
access point's WAN connection. This value is set on the
WAN screen.
The Link parameter displays Up if the WAN connection is
active between the access point and network, and Down if
the WAN connection is interrupted or lost. Use this
information to assess the current connection status of the
WAN port.
The WAN connection speed is displayed in Megabits per
second (Mbps), for example, 54Mbps. If the throughput
speed is not achieved, examine the number of transmit
and receive errors, or consider increasing the supported
data rate.
Altitude 4700 Series Access Point Product Reference Guide