Ap4700>Admin(Network.wan.nat)>Add - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.wan.nat)>add
Adds NAT entries.
Syntax
add <idx> <name>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is the name
of the entry (1 to 7 characters), <tran> is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or
all), <port1> is the starting port number in a port range, <port2> is the ending port number in a port range,
<ip> is the internal IP address, and <dst_port> is the (optional) internal translation port.
Example
admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name Transport
-----------------------------------------------------------------------------
1 indoor udp
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) Settings" on page
334
<tran> <port1>
start port end port
20 29
141.
Altitude 4700 Series Access Point Product Reference Guide
<port2> <ip> <dst_port>
internal ip translation
10.10.2.2 0
"Configuring Network