Electrical Characteristics
The Altitude 4700 Series Access Points have the following electrical characteristics:
Table 3: Electrical Characteristics
Operating Voltage
38-54V DC
Operating Current
Not to exceed 600mA @ 48VDC
Radio Characteristics
This section describes the radio characteristics of the Altitude 4700 Series Access Points:
Altitude 4710 and Altitude 4750 Radio Characteristics on page 626
●
Altitude 4710 and Altitude 4750 Radio Characteristics
An Altitude 4710 and Altitude 4750 has the following radio characteristics:
Table 4: Radio Characteristics
Operating
All channels from 4920 MHz to 5825 MHz except channel 52–64
Channels
Channels 1-13 (EU), Channels 1-11 (US/Canada)
Channel 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory
Data Rates
802.11g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps
Supported
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-15 up to 300Mbps
Wireless Medium
Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing (OFDM)
Spatial multiplexing (MIMO)
Network
802.11a, 802.11b, 802.11g, 802.3, 802.11n (Draft 2.0)
Standards
Maximum
Maximum available conducted transmit power per chain: 2.4Ghz: + 23 dBm
Available
Maximum available conducted transmit power all chains: 2.4GHz: + 27.7 dBm
Transmit Power
Maximum available conducted transmit power per chain: 5.2Ghz: + 20 dBm
Maximum available conducted transmit power all chains: 5.2GHz: + 24.7 dBm
Transmit Power
1 dB increments
Adjustment
Antenna
2x3 or 3x3
Configuration
626
Altitude 4700 Series Access Point Product Reference Guide