System Commands; Ap4700>Admin(System) - Extreme Networks Altitude 4700 Series Product Reference Manual

System Commands

AP4700>admin(system)>
Displays the System submenu. The items available under this command are shown below.
restart Restarts the access point.
show Shows access point system parameter settings.
set Defines access point system parameter settings.
lastpw Displays last debug password.
exec Goes to a Linux command menu.
arp Dispalys the access point's arp table.
power-setup Goes to the Power Settings submenu.
aap-setup Goes to the Adaptive AP Settings submenu.
lldp Goes to the LLDP submenu.
access Goes to the access point access submenu where access point access methods can be
enabled.
cmgr Goes the Certificate Manager submenu.
snmp Goes to the SNMP submenu.
userdb Goes to the user database submenu.
RADIUS Goes to the RADIUS submenu.
ntp Goes to the Network Time Protocol submenu.
logs Displays the log file submenu.
config Goes to the configuration file update submenu.
fw-update Goes to the firmware update submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
Altitude 4700 Series Access Point Product Reference Guide
459