Ap4700>Admin(System.aap-Setup)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(system.aap-setup)>set
Sets access point's Adaptive AP configuration.
Syntax
set auto-discovery
ipadr
name
port
passphrase
tunnel-to-controller
ac-keepalive
load-balancing
admin(system.aap-setup)>set auto-discovery enable
admin(system.aap-setup)>set ipadr 192.235.111.10
admin(system.aap-setup)>set port 1812
admin(system.aap-setup)>set passphrase mudskipper
admin(system.aap-setup)>set load-balancing enable
For information on configuring adaptive AP using the applet (GUI), see
page 85.
For an overview of adaptive AP functionality and its implications, see
page 605.
470
Sets the controller auto-discovery mode (enable/disable).
Defines the controller IP address used.
Defines the controller name for DNS lookups (up to 127 characters).
Sets the port.
Defines the pass phrase or key for controller connection.
Enables/disables the tunnel between controller and access point.
Defines the keepalive interval.
Enables or disables AAP load balancing.
Altitude 4700 Series Access Point Product Reference Guide
"Adaptive AP Setup" on
"Adaptive AP Overview" on