Accessing The Cli Via Telnet - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference

Accessing the CLI via Telnet

To connect to the access point CLI through a Telnet connection:
1 If this is your first time connecting to your access point, keep in mind the access point uses a static
IP WAN address (10.1.1.1). Additionally, the access point's LAN port is set as a DHCP client.
2 Enter the default username of admin and the default password of admin123. If this is your first time
logging into the access point, you are unable to access any of the access point's commands until the
country code is set. A new password will also need to be created.
292
Altitude 4700 Series Access Point Product Reference Guide