Ap4700>Admin(Network.lan.dhcp)>Show - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(network.lan.dhcp)>show
Shows DHCP parameter settings.
Syntax
show Displays DHCP parameter settings for the access point. These parameters are defined with the
set command.
Example
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address
Ending IP Address
Lease Time
**LAN2 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address
Ending IP Address
Lease Time
For information on configuring DHCP using the applet (GUI), see
page 123.
Altitude 4700 Series Access Point Product Reference Guide
: 192.168.0.100
: 192.168.0.254
: 86400
: 192.168.0.100
: 192.168.0.254
: 86400
"Configuring the LAN Interface" on
317