Ap4700>Admin(System.ntp)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(system.ntp)>set
Sets NTP parameters for access point clock synchronization.
Syntax
set mode <ntp-mode>
server <idx> <ip>
port <idx> <port>
intrvl <period>
time <time>
zone <zone>
Example
admin(system.ntp)>set mode enable
admin(system.ntp)>set server 1 203.21.37.18
admin(system.ntp)>set port 1 123
admin(system.ntp)>set intrvl 15
admin(system.ntp)>set zone 1
For information on configuring NTP using the applet (GUI), see
(NTP)" on page 110.
Altitude 4700 Series Access Point Product Reference Guide
Enables or disables NTP.
Sets the NTP sever IP address.
Defines the port number.
Defines the clock synchronization interval used between the access point and
the NTP server in minutes (15 - 65535).
Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the
month, [hh] - hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of
the zone.
Defines the time zone (by index) for the target country.
"Configuring Network Time Protocol
543