Extreme Networks Altitude 4700 Series Product Reference Manual page 617

To disable automatic adoption on the controller:
1 Select Network > Access Port Radios from the controller main menu tree.
2 Select the Configuration tab (should be displayed be default) and click the Global Settings button.
3 Ensure the Adopt unconfigured radios automatically option is NOT selected.
When disabled, there is no automatic adoption of non-configured radios on the network.
Additionally, default radio settings will NOT be applied to Access Ports when automatically
adopted.
NOTE
For IPSec deployments, refer to
WLAN" on page 620 and take note of the CLI commands in red and associated comments in green.
Any WLAN configured on the controller becomes an extended WLAN by default for an AAP.
4 Select Network > Wireless LANs from the controller main menu tree.
5 Select the target WLAN you would like to use for AAP support from those displayed and click the
Edit button.
6 Select the Independent Mode (AAP Only) checkbox.
7 Selecting the checkbox designates the WLAN as independent and prevents traffic from being
forwarded to the controller. Independent WLANs behave like WLANs as used on a a standalone
Access Point. Leave this option unselected (as is by default) to keep this WLAN an extended WLAN
(a typical centralized WLAN created on the controller).
Altitude 4700 Series Access Point Product Reference Guide
"Sample Controller Configuration File for IPSec and Independent
617