Extreme Networks Altitude 4700 Series Product Reference Manual page 284

Monitoring Statistics
Radio Association
QoS Client Type
Encryption
5 Refer to the Traffic field to view individual MU RF throughput information.
Packets per second The Total column displays average total packets per
Throughput
Avg. Bit Speed
% of Non-unicast
pkts
6 Refer to the RF Status field to view MU signal and signal disturbance information.
Avg MU Signal
Avg MU Noise
Avg MU SNR
7 Refer to the Errors field to view MU retry information and statistics on packets not transmitted.
Avg Num of Retries Displays the average number of retries for the MU. The
284
Displays the name of the AP MU is currently associated
with.
Displays the data type transmitted by the mobile unit.
Possible types include Legacy, Voice, WMM Baseline and
Power Save.
Displays the encryption scheme deployed by the
associated MU.
second crossing the MU. The Rx column displays the
average total packets per second received on the MU. The
Tx column displays the average total packets per second
sent on the MU. The number in black represents Pkts per
second for the last 30 seconds and the number in blue
represents Pkts per second for the last hour.
The Total column displays the average total packets per
second crossing the selected MU. The Rx column displays
the average total packets per second received on the MU.
The Tx column displays the average total packets per
second sent on the MU. The number in black represents
throughput for the last 30 seconds, the number in blue
represents throughput for the last hour.
The Total column displays the average bit speed in Mbps
for a given time period on the MU. This includes all
packets sent and received. The number in black
represents average bit speed for the last 30 seconds and
the number in blue represents average bit speed for the
last hour. Consider increasing the data rate of the AP if the
current bit speed does not meet network requirements.
The associated MU must also be set to the higher rate to
interoperate with the access point at that data rate.
Displays the percentage of the total packets for the
selected mobile unit that are non-unicast. Non-unicast
packets include broadcast and multicast packets. The
number in black represents packets for the last 30
seconds and the number in blue represents packets for the
last hour.
Displays RF signal strength in dBm for the target MU. The
number in black represents signal information for the last
30 seconds and the number in blue represents signal
information for the last hour.
Displays RF noise for the target MU. The number in black
represents noise for the last 30 seconds, the number in
blue represents noise for the last hour.
Displays the Signal to Noise Ratio (SNR) for the target
MU. The Signal to Noise Ratio is an indication of overall
RF performance on your wireless network.
number in black represents average retries for the last 30
seconds and the number in blue represents average
retries for the last hour.
Altitude 4700 Series Access Point Product Reference Guide