Mesh Networking Frequently Asked Questions - Extreme Networks Altitude 4700 Series Product Reference Manual

Verifying Mesh Network Functionality for Scenario #2
You now have a three AP demo multi-hop mesh network ready to demonstrate. Associate an MU on
the WLANs configured on the 802.11b/g/n radio for each AP and pass traffic among the members of
the mesh network.

Mesh Networking Frequently Asked Questions

The following scenarios represent issues that could be encountered and resolved when defining an
Access Point supported mesh configuration:
Mesh Deployment Issue 1 - Client Bridge can only connect to one of two Base Bridges
You have two Access Points configured as base bridges (AP1, AP2) and one Access Point defined as
a as a client bridge (AP3). However, the client bridge is able to connect to only one of the base
bridges.
Altitude 4700 Series Access Point Product Reference Guide
601