Ap4700>Admin(System.config)>Partial - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(system.config)>partial
Restores a partial factory default configuration. The access point's LAN, WAN and SNMP settings are
unaffected by the partial restore.
Syntax
default Restores a partial access point configuration.
Example
admin(system.config)>partial
Are you sure you want to partially default AP4700? <yes/no>:
For information on importing/exporting access point configurations using the applet (GUI), see
"Importing/Exporting Configurations" on page 114.
Altitude 4700 Series Access Point Product Reference Guide
552