Chapter 2: Hardware Installation; Precautions; Requirements - Extreme Networks Altitude 4700 Series Product Reference Manual

2
C H A P T E R
An Altitude 4700 Series Access Point installation includes mounting the Access Point, connecting the
Access Point to the network, connecting antennae and applying power. Installation procedures vary for
different environments. See the following sections for more details:
Precautions on page 45
●
Requirements on page 45
●
Package Contents on page 46
●
Access Point Placement on page 47
●
Power Options on page 48
●
Power Injector System on page 48
●
Mounting an Altitude 4700 Series Access Point on page 50
●
LED Indicators on page 57
●
Setting Up MUs on page 60
●
CAUTION
Extreme Networks recommends conducting a radio site survey prior to installing an Access Point. A site
survey is an excellent method of documenting areas of radio interference and providing a tool for device placement.

Precautions

Before installing an Altitude 4700 Series Access Point, verify the following:
Do not install in wet or dusty areas without additional protection. Contact an Extreme Networks
●
representative for more information.
Verify the environment has a continuous temperature range between -20° C to 50° C.
●

Requirements

The minimum installation requirements for a single-cell, peer-to-peer network:
An Altitude 4700 Series Access Point
●
Altitude 4700 Series Access Point Product Reference Guide
Hardware Installation
45