Configuring Ap3935E Channel Settings; Determine The Antenna Model; Configure Radio Rf Port - Extreme Networks ExtremeWireless AP3935i Installation Manual
Hide thumbs
Also See for ExtremeWireless AP3935i:
- Installation manual (44 pages) ,
- Installation manual (46 pages)
Table of Contents
Advertisement
Configuring AP3935e Channel Settings
The AP3935e must be installed by a professional installer. Before starting the installation, the
installer needs to determine and configure the following:
•
Determine the Antenna Model
•
Configure Radio RF Port
•
Configure Radio Channel
•
Configure Radio Transmit (Tx) Power
Determine the Antenna Model
The professional installer needs to determine antenna models and the number of antenna ports for
that model. The number of ports can be determined from visual inspection of the antenna or from
the antenna model. For information about antenna models, see Certified External Antennas for
AP3935e, Table
Configure Radio RF Port
The professional installer configures Radio RF ports where antenna ports will be connected.
To Configure Radio RF Ports through the ExtremeWireless Assistant
1.
Log into the Wireless Assistant.
2.
From the top menu, click AP. The Wireless AP screen is displayed.
3.
Select APs in the left pane, then in the Wireless AP list, click the Wireless AP whose properties
you want to modify. The AP Properties tab displays Wireless AP information.
12 Configuring AP3935e Channel Settings
A‐4 on page 24.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWireless AP3935i and is the answer not in the manual?
Questions and answers