Extreme Networks Altitude 4700 Series Product Reference Manual page 149

NOTE
Before editing the properties of an existing WLAN, ensure it is not being used by an access point radio, or
is a WLAN that is needed in its current configuration. Once updated, the previous configuration is not available
unless saved.
Use the New WLAN and Edit WLAN screens as required to create/modify a WLAN. To create a new
WLAN or edit the properties of an existing WLAN:
1 Select Network Configuration > Wireless from the access point menu tree.
The Wireless Configuration screen displays.
2 Click the Create button to configure a new WLAN, or highlight a WLAN and click the Edit button to
modify an existing WLAN. Either the New WLAN or Edit WLAN screen displays.
3 Set the parameters in the Configuration field as required for the WLAN.
CAUTION
When using the Access Point's hotspot functionality, ensure MUs are re-authenticated when changes
are made to the characteristics of a hotspot enabled WLAN, as MUs within the WLAN will be dropped from
device association.
Altitude 4700 Series Access Point Product Reference Guide
149