Ap4700>Admin(Network.wireless.radio.802-11N[2.4 Ghz])>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.wireless.radio.802-11n[2.4 GHz])>set
Defines specific 802.11n (2.4 GHz) radio parameters.
Syntax
set placement
ch-mode
channel
power
antenna-type
antenna-gain
rf-mode
rates
beacon
dtim
aggr
shortgi
preamble
rts
range
qos
qbss-beacon
qbss-mode
single-antenna
dynamic-chain-selection
tkip-ht-compatibility
bcmc-tx-speed
Example
admin(network.wireless.radio.802-11n[2.4 GHz])>set placement indoor
admin(network.wireless.radio.802-11n[2.4 GHz])>set ch-mode user
admin(network.wireless.radio.802-11n[2.4 GHz])>set channel 11
admin(network.wireless.radio.802-11n[2.4 GHz])>set power 4
admin(network.wireless.radio.802-11n[2.4 GHz])>set antenna-type 1
admin(network.wireless.radio.802-11n[2.4 GHz])>set antenna-gain 10.00
admin(network.wireless.radio.802-11n[2.4 GHz])>set rf-mode b-only
admin(network.wireless.radio.802-11n[2.4 GHz])>set rates
admin(network.wireless.radio.802-11n[2.4 GHz])>set beacon 100
396
Defines the access point radio placement as indoors or outdoors.
Determines how the radio channel is selected (user, auto-20 or auto-40).
Defines the radio channel used. Channel allowed depends on actual country of
operation.
Defines the antenna power transmit level. Depends on radio type, channel and
country.
Sets the numerical antenna type used with the access point (0-7). Antenna types
include: 0-Default antenna, 1-Dual band antenna, 2-Omni antenna, 3-Yagi
antenna, 4-Embedded antenna,
5-Panel antenna, 6-Patch antenna, 7-Sector antenna.
Sets the gain used by the selected antenna type (between 0.00 - 30.00 dBm)
Sets the default rates for the 802.11 mode selected (b-only, g-only, n-only, b-
and-g, or
bg-and-n).
Sets the supported radio transmit rates.
Sets the beacon interval used by the radio.
Defines the DTIM interval (by index) used by the radio.
Sets the radio's aggregation.
Enables/disables a short guard interval of 40MHz.
Enables/disables short preamble support for the radio (this is 2.4 GHz radio
specific).
Defines the RTS Threshold value for the radio.
Sets the radio's extended range (in miles 0-50).
Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for
the radio.
Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
Enables/disables the QBSS load element.
Enables/disables single antenna support. Enable (default setting) to decrease
sensitivity and device retries.
Enables/disables dynamic chain selection for the radio. For more information,
see "Dynamic Chain Selection" on page
Enables/disables TKIP-HT rates compatibility.
Sets the transmission speed to either range or throughout mode.
Altitude 4700 Series Access Point Product Reference Guide
20.