AP4700>admin>passwd
Changes the password for the admin login.
Syntax
passwd
Changes the admin password for access point access. This requires typing the old admin
password and entering a new password and confirming it. Passwords can be up to 11 characters.
The access point CLI treats the following as invalid characters:
' " \ & $ ^ * + ? [ ( { | , < >
In order to avoid problems when using the access point CLI, these characters should be avoided.
Example
admin>passwd
Old Admin Password:******
New Admin Password (0 - 11 characters):******
Verify Admin Password (0 - 11 characters):******
For information on configuring passwords using the applet (GUI), see
Altitude 4700 Series Access Point Product Reference Guide
"Setting Passwords" on page
295
198.