Extreme Networks Altitude 4700 Series Product Reference Manual page 221

Color Access Type
Green Full Access
Yellow Limited Access
Red No Access
3 Configure the Rules field as required to allow or deny access to selected (enabled) protocols.
Allow or Deny all
protocols, except
Altitude 4700 Series Access Point Product Reference Guide
Description
No protocol exceptions (rules) are specified. All
traffic may pass between these two areas.
One or more protocol rules are specified. Specific
protocols are either enabled or disabled between
these two areas. Click the table cell of interest and
look at the exceptions area in the lower half of the
screen to determine the protocols that are either
allowed or denied.
All protocols are denied, without exception. No
traffic will pass between these two areas.
Use the drop-down menu to select either Allow or Deny.
The selected setting applies to all protocols except those
with enabled checkboxes and any traffic that is added to
the table. For example, if the adoption rule is to Deny
access to all protocols except those listed, access is
allowed only to those selected protocols.
221