Ap4700>Admin(Stats)>Send-Cfg-Ap - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(stats)>send-cfg-ap
Copies the access point's configuration to another access point within the known AP table.
Syntax
send-cfg-ap <index>
Example
admin(stats)>send-cfg-ap 2
admin(stats)>
NOTE
The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN IP data,
WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI), see
"Viewing Known Access Point Statistics" on page
Altitude 4700 Series Access Point Product Reference Guide
Copies the access point's configuration to the access points within the known AP
table. Mesh configuration attributes do not get copied using this command and
must be configured manually.
288.
563