Extreme Networks Altitude 4700 Series Product Reference Manual page 340

CLI Reference
ike opmode
myidtype
remidtype
myiddata
remiddata
authtype
authalgo
phrase
encalgo
lifetime
group
For information on configuring VPN using the applet (GUI), see
page 225.
340
<name> <opmode> Sets the Operation Mode of IKE for <name> to
<name> <idtype>
<name> <idtype>
<name> <idtype>
<name> <idtype>
<name> <authtype
>
<name> <authalgo
>
<name> <phrase>
<name> <encalgo> Sets the IKE Encryption Algorithm for <name> to
<name> <lifetime>
<name> <group>
Altitude 4700 Series Access Point Product Reference Guide
Main or Aggr(essive).
Sets the Local ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (IP,
FQDN, or UFQDN).
Sets the Remote ID type for IKE authentication
for <name> (1 to 13 characters) to <idtype> (IP,
FQDN, or UFQDN).
Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
Sets the IKE Authentication type for <name> to
<authtype> ( PSK or RSA).
Sets the IKE Authentication Algorithm for <name>
to MD5 or SHA1.
Sets the IKE Authentication passphrase for
<name> to <phrase>.
<encalgo> (one of DES, 3DES, AES128,
AES192, or AES256).
Sets the IKE Key life time in seconds for <name>
to <lifetime>.
Sets the IKE Diffie-Hellman Group for <name> to
either G768 or G1024.
"Configuring VPN Tunnels" on