Ap4700>Admin(Network.wireless.acl)>Create - Extreme Networks Altitude 4700 Series Product Reference Manual

AP4700>admin(network.wireless.acl)>create
Creates an MU ACL policy.
Syntax
create show
set
add-addr
delete
add-policy
..
Example
admin(network.wireless.acl.create)>show
Policy Name
Policy Mode
-----------------------------------------------------------------------------
index
-----------------------------------------------------------------------------
1
2
admin(network.wireless.acl.create)>set acl-name engineering
admin(network.wireless.acl.create)>set mode deny
admin(network.wireless.acl.create)>add-addr 00A0F843AABB
admin(network.wireless.acl.create)>add-policy
For information on configuring the ACL options available to the access point using the applet (GUI), see
"Configuring a WLAN Access Control List (ACL)" on page
Altitude 4700 Series Access Point Product Reference Guide
<acl-
name>
acl-name <index>
mode <acl-
mode>
<mac1> or
<mac1>
<mac2>
<index> <all>
: Front Lobby
: allow
start mac
00A0F8334455
00A0F8400000
Displays the parameters of a new ACL policy.
Sets the MU ACL policy name.
Sets the ACL mode for the defined index (1-16).
Allowed MUs can access the access point managed
LAN. Options are deny and allow.
Adds specified MAC address to list of ACL MAC
addresses.
Removes either a specified ACL index or all ACL
entries.
Completes the policy creation and exits the CLI.
Cancels the creation of the ACL and exits the CLI.
end mac
00A0F8334455
00A0F8402001
153.
385