Extreme Networks Altitude 4700 Series Product Reference Manual page 247

2 Enter a value (in minutes) in the Allowed APs Age Out Time field to indicate the number of elapsed
minutes before an AP will be removed from the approved list and reevaluated. A zero (0) for this
value (default value) indicates an AP can remain on the approved AP list permanently.
3 Enter a value (in minutes) in the Rogue APs Age Out Time field to indicate the number of elapsed
minutes before an AP will be removed from the rogue AP list and reevaluated. A zero (0) for this
value (default value) indicates an AP can remain on the rogue AP list permanently.
4 Highlight an AP from within the Rogue APs table and click the Add to Allowed APs List button to
move the device into the list of Allowed APs.
5 Click the Add All to Allowed APs List button to move each of the APs displayed within the Rogue
APs table to the list of allowed APs.
6 Highlight a rogue AP and click the Details button to display a screen with device and detection
information specific to that rogue device. This information is helpful in determining if a rogue AP
should be moved to the Allowed APs table.
For more information on the displaying information on detected rogue APs, see
AP Details" on page
7 To remove the Rogue AP entries displayed within the Rogue APs field, click the Clear Rogue AP List
button.
Extreme Networks only recommends clearing the list of Rogue APs when the devices displaying
within the list do not represent a threat to the Access Point managed network.
8 Click Apply to save any changes to the Active APs screen. Navigating away from the screen without
clicking Apply results in all changes to the screen being lost.
9 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on the Active APs screen to the last saved configuration.
10 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
Displaying Rogue AP Details
Before moving a rogue AP into the list of allowed APs within the Active APs screen, the device address
and rogue detection information for that AP should be evaluated.
To evaluate the properties of a rogue AP:
1 Select Network Configuration > Wireless > Rogue AP Detection > Active APs from the access point menu
tree.
2 Highlight a target rogue AP from within Rogue APs table and click the Details button.
The Detail screen displays for the rogue AP.
Altitude 4700 Series Access Point Product Reference Guide
247.
"Displaying Rogue
247