Ap4700>Admin(Network.wireless.security)>Create - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(network.wireless.security)>create
Defines the parameter of access point security policies.
Syntax
create
show
set sec-
name
auth
kerb
eap
378
<name>
<authtype>
realm <name>
server <sidx>
port <sidx>
server <sidx>
port <sidx>
secret <sidx>
reauth mode
period
retry
accounting mode
server
port
Altitude 4700 Series Access Point Product Reference Guide
Defines the parameters of a
security policy.
Displays new or existing security
policy parameters.
Sets the name of the security
policy.
Sets the authentication type for
WLAN <idx> to <type> (none,
eap, or kerberos).
Note: Kerberos parameters are
only in affect if "kerberos" is
specified for the authentication
method (set auth <type>).
Sets the Kerberos realm.
<ip> Sets the Kerberos server <sidx>
(1-primary, 2-backup, or 3-
remote) to KDC IP address.
<port> Sets the Kerberos port to <port>
(KDC port) for server <ksidx> (1-
primary, 2-backup, or 3-remote).
Note: EAP parameters are only
in affect if "eap" is specified for
the authentication method (set
auth <type>).
<ip> Sets the RADIUS server (1-
primary or as 2-secondary) IP
address <ip>.
<port> Sets the RADIUS server <sidx>
(1-primary or 2-secondary)
<port> (1-65535).
<secret> Sets the EAP shared secret
<secret> (1-63 characters) for
server <sidx> (1-primary or 2-
secondary).
<mode> Enables or disables EAP
reauthentication.
<time> Sets the reauthentication period
<period> in seconds (30-9999).
<number> Sets the maximum number of
reauthentication retries <retry>
(1-99).
<mode> Enable or disable RADIUS
accounting.
<ip> Set external RADIUS server IP
address.
<port> Set external RADIUS server port
number.