Chapter 4: System Configuration - Extreme Networks Altitude 4700 Series Product Reference Manual

4
C H A P T E R
The Access Point contains a built-in browser interface for system configuration and remote management
using a standard Web browser such as Microsoft Internet Explorer, Netscape Navigator or Mozilla
Firefox (version 0.8 or higher is recommended). The browser interface also allows for system monitoring
of the Access Point.
Web management of the access point requires either Microsoft Internet Explorer 5.0 or later or Netscape
Navigator 6.0 or later.
NOTE
For optimum compatibility, use Sun Microsystems JRE 1.5 or higher (available from Sun's Web site), and
be sure to disable Microsoft's Java Virtual Machine if installed.
To connect to the Access Point, an IP address is required. If connected to the Access Point using the
WAN port, the default static IP address is 10.1.1.1. The default password is "admin123." If connected to
the Access Point using the LAN port, the default setting is DHCP client. The user is required to know
the IP address to connect to the Access Point using a Web browser.
System configuration topics include:
Configuring System Settings on page 78
●
Configuring Power Settings on page 81
●
Adaptive AP Setup on page 85
●
Configuring Data Access on page 87
●
Managing Certificate Authority (CA) Certificates on page 91
●
Configuring SNMP Settings on page 97
●
Configuring LLDP Settings on page 108
●
Configuring Network Time Protocol (NTP) on page 110
●
Logging Configuration on page 112
●
Importing/Exporting Configurations on page 114
●
Updating Device Firmware on page 118
●
Altitude 4700 Series Access Point Product Reference Guide
System Configuration
77