Extreme Networks Altitude 4700 Series Product Reference Manual page 193

admin(network.ipfilter)>add icmp1 ICMP ALL ALL 10.1.1.1 10.1.1.10 11.1.1.1
11.1.1.10
admin(network.ipfilter)>show
-------------------------------------------------------------------------------
Idx Name Protocol Port-Start-End SrcIP-Start-End DstIP-Start-End In-Use
-------------------------------------------------------------------------------
1 icmp1 ICMP
admin(network.ipfilter)>
Once created, the filter displays within the Network Configuration > IP Filtering screen.
Applying the Filter to a WLAN or LAN
Once created, filters in the IP Filter Table can be applied to a WLAN or LAN. Refer to the following
diagram to illustrate this point
NOTE
When both LAN IP filtering and WLAN IP filtering are enabled, a packet must pass the criteria of both LAN
and WLAN filter policies.
Altitude 4700 Series Access Point Product Reference Guide
ALL 10.1.1.1
10.1.1.10
11.1.1.1 NO
11.1.1.10
193