Ap4700>Admin(Stats)>Send-Cfg-All - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(stats)>send-cfg-all
Copies the access point's configuration to all of the access points within the known AP table.
Syntax
send-cfg-all Copies the access point's configuration to all of the access points within the known AP table.
Example
admin(stats)>send-cfg-all
admin(stats)>
NOTE
The send-cfg-all command copies all existing configuration parameters except Mesh settings, LAN IP data,
WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI), see
"Viewing Known Access Point Statistics" on page
564
288.
Altitude 4700 Series Access Point Product Reference Guide