Extreme Networks Altitude 4700 Series Product Reference Manual page 116

System Configuration
SFTP/FTP/TFTP
Server IP
Filepath (optional)
FTP
TFTP
SFTP
Username
Password
Import
Configuration
Export
Configuration
3 Configure the HTTP Import/Export field to import/export access point configuration settings using
HTTP.
CAUTION
For HTTP downloads (exports) to be successful, pop-up messages must be disabled.
Upload and Apply
A Configuration File
Download
Configuration File
116
Enter the numerical (non DNS name) IP address of the
destination SFTP, FTP or TFTP server where the
configuration file is imported or exported.
Defines the optional path name used to import/export the
target configuration file.
Select the FTP radio button if using an FTP server to
import or export the configuration.
Select the TFTP radio button if using an FTP server to
import or export the configuration.
Select the SFTP radio button if using a SFTP server to
import or export the configuration.
Specify a username to be used when logging in to the FTP
server. A username is not required for TFTP server logins.
Define a password allowing access to the server for the
import or export operation.
Click the Import Configuration button to import the
configuration file from the server with the assigned
filename and login information. The system displays a
confirmation window indicating the administrator must log
out of the access point after the operation completes for
the changes to take effect. Click Yes to continue the
operation. Click No to cancel the configuration file import.
Click the Export Configuration button to export the
configuration file from the server with the assigned
filename and login information. If the IP mode is set to
DHCP Client, IP address information is not exported (true
for both LAN1, LAN2 and the WAN port). For LAN1 and
LAN2, IP address information is only exported when the IP
mode is set to either static or DHCP Server. For the WAN
port, IP address information is only exported when the This
interface is a DHCP Client checkbox is not selected.
The system displays a confirmation window prompting the
administrator to log out of the access point after the
operation completes for the changes to take effect. Click
Yes to continue the operation. Click No to cancel the
configuration file export.
Click the Upload and Apply A Configuration File button to
upload a configuration file to this Access Point using
HTTP.
Click the Download Configuration File button to download
this Access Point's configuration file using HTTP.
Altitude 4700 Series Access Point Product Reference Guide