Ap4700>Admin(Network.wan)>Set - Extreme Networks Altitude 4700 Series Product Reference Manual

Software version 4.1
Hide thumbs Also See for Altitude 4700 Series:
Table of Contents

Advertisement

AP4700>admin(network.wan)>set
Defines the configuration of the access point WAN port.
Syntax
set
wan
enable/disable
dhcp
enable/disable
ipadr
<idx>
mask
<a.b.c.d>
dgw
<a.b.c.d>
dns
<idx>
auto-
enable/disable
negotiation
speed
<mbps>
duplex
<mode>
pppoe
<mode>
user
passwd
ka
idle
type
wwan
<mode>
Example
admin(network.wan)>
admin(network.wan)>set dhcp disable
admin(network.wan)>set ipadr 157.169.22.5
admin(network.wan)>set dgw 157.169.22.1
admin(network.wan)>set dns 1 157.169.22.2
admin(network.wan)>set auto-negotiation disable
admin(network.wan)>set speed 10M
admin(network.wan)>set duplex half
admin(network.wan)>set mask 255.255.255.000
admin(network.wan)>set pppoe mode enable
admin(network.wan)>set pppoe type chap
admin(network.wan)>set pppoe user jk
admin(network.wan)>set pppoe passwd @#$goodpassword%$#
admin(network.wan)>set pppoe ka enable
admin(network.wan)>set pppoe idle 600
admin(network.wan)>set wwan mode disable
Altitude 4700 Series Access Point Product Reference Guide
Enables or disables the access point WAN port.
Enables or disables WAN DHCP Client mode.
<a.b.c.d>
Sets up to 8 (using <indx> from
addresses <a.b.c.d> for the
access point WAN interface.
Sets the subnet mask for the access point WAN
interface.
Sets the default gateway IP address to <a.b.c.d>.
<a.b.c.d>
Sets the IP address of one or two DNS servers,
where <indx> indicates either the primary (1) or
secondary (2) server, and <a.b.c.d> is the IP
address of the server.
Enables or disables auto-negotiation for the access
point WAN port.
Defines the WAN port speed as either 10 Mbps or
100 Mbps.
Defines the Access Port WAN port duplex as either
half or full.
enable/disable
Enables or disables PPPoE.
<name>
Sets PPPoE user name.
<password>
Defines the PPPoE password.
enable/disable
Enables or disables PPPoE keepalive.
<time>
Sets PPPoE idle time.
<auth-type>
Sets PPPoE authentication type.
enable/fail-over
Sets the 3G wireless WAN operations mode
(disable/fail-over) for a defined user name, password
and remote gateway.
1
to 8) IP
329

Advertisement

Table of Contents
loading

Table of Contents