Ap4700>Admin(System)>Restart - Extreme Networks Altitude 4700 Series Product Reference Manual

CLI Reference
AP4700>admin(system)>restart
Restarts the access point access point.
Syntax
restart Restarts the access point.
Example
admin(system)>restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the AP4700?? (yes/no):
AP4700 Boot Firmware Version 4.1.0.0-xxx
Press escape key to run boot firmware ........
Power On Self Test
testing ram
testing nor flash
testing nand flash
testing ethernet
For information on restarting the access point using the applet (GUI), see
on page 78.
460
: pass
: pass
: pass
: pass
Altitude 4700 Series Access Point Product Reference Guide
"Configuring System Settings"